Customization: | Available |
---|---|
Application: | Motor, Motorcycle, Machinery, Marine, Agricultural Machinery, Manipulator |
Function: | Change Drive Torque, Change Drive Direction, Speed Reduction |
Still deciding? Get samples of US$ 257/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Description:
(1).The output shaft is made of large size,large span double bearing design,output shaft and planetary arm bracket as a whole.The input shaft is placed directly on the planet arm bracket to ensure that the reducer has high operating accuracy and maximum torsional rigidity.
(2).Shell and the inner ring gear used integrated design,quenching and tempering after the processing of the teeth so that it can achieve high torque,high precision,high wear resistance.Moreover surface nickel-plated anti-rust treatment,so that its corrosion resistance greatly enhanced.
(3).The planetary gear transmission employs full needle roller without retainer to increase the contact surface,which greatly upgrades structural rigidity and service life.
(4).The gear is made of Japanese imported material.After the metal cutting process,the vacuum carburizing heat treatment to 58-62HRC. And then by the hobbing,Get the best tooth shape,tooth direction,to ensure that the gear of high precision and good impact toughness.
(5).Input shaft and sun gear integrated structure,in order to improve the operation accuracy of the reducer.
1.Low Noise:The use of helical gear design,to achieve a smooth,quite operation of the reducer.
2. High Precision:Backlash is 3 arcmin or less,accurate positioning.
3. High Rigidity,High Torque:The output shaft used large size,large span double support bearing design,which improves the rigidity and torque of the reducer.
4. High Efficiency:1-stage up to 95% or more,2-stage up to 92% or more.
5. Maintenance-Free:Low grease wear,can be lifetime lubrication.
6. Sealing Effect is Good:Lubricating grease with high viscosity,not easy to separate the characteristics,ip65 protection class to ensure that no grease leakage.
7. Installation Unrestrained:Can be installed arbitrarily.
8. Wide Applicability:Applicable to any type of servo motor.
9. An organic [integral] whole output axis.
Specifications | PVFN60 | PVFN90 | PVFN120 | |||
Technal Parameters | ||||||
Max. Torque | Nm | 1.5times rated torque | ||||
Emergency Stop Torque | Nm | 2.5times rated torque | ||||
Max. Radial Load | N | 240 | 450 | 1240 | ||
Max. Axial Load | N | 220 | 430 | 1000 | ||
Torsional Rigidity | Nm/arcmin | 1.8 | 4.85 | 11 | ||
Max.Input Speed | rpm | 8000 | 6000 | 6000 | ||
Rated Input Speed | rpm | 4000 | 3500 | 3500 | ||
Noise | dB | ≤58 | ≤60 | ≤65 | ||
Average Life Time | h | 20000 | ||||
Efficiency Of Full Load | % | L1≥95% L2≥92% | ||||
Return Backlash | P1 | L1 | arcmin | ≤8 | ≤8 | ≤8 |
L2 | arcmin | ≤12 | ≤12 | ≤12 | ||
P2 | L1 | arcmin | ≤16 | ≤16 | ≤16 | |
L2 | arcmin | ≤20 | ≤20 | ≤20 | ||
Moment Of Inertia Table | L1 | 3 | Kg*cm2 | 0.46 | 1.73 | 12.78 |
4 | Kg*cm2 | 0.46 | 1.73 | 12.78 | ||
5 | Kg*cm2 | 0.46 | 1.73 | 12.78 | ||
7 | Kg*cm2 | 0.41 | 1.42 | 11.38 | ||
10 | Kg*cm2 | 0.41 | 1.42 | 11.38 | ||
L2 | 12 | Kg*cm2 | 0.44 | 1.49 | 12.18 | |
15 | Kg*cm2 | 0.44 | 1.49 | 12.18 | ||
16 | Kg*cm2 | 0.72 | 1.49 | 12.18 | ||
20 | Kg*cm2 | 0.44 | 1.49 | 12.18 | ||
25 | Kg*cm2 | 0.44 | 1.49 | 12.18 | ||
28 | Kg*cm2 | 0.44 | 1.49 | 12.18 | ||
30 | Kg*cm2 | 0.44 | 1.49 | 12.18 | ||
35 | Kg*cm2 | 0.44 | 1.49 | 12.18 | ||
40 | Kg*cm2 | 0.44 | 1.49 | 12.18 | ||
50 | Kg*cm2 | 0.34 | 1.25 | 11.48 | ||
70 | Kg*cm2 | 0.34 | 1.25 | 11.48 | ||
100 | Kg*cm2 | 0.34 | 1.25 | 11.48 | ||
Technical Parameter | Level | Ratio | PVFN60 | PVFN90 | PVFN120 | |
Rated Torque | L1 | 3 | Nm | 27 | 96 | 161 |
4 | Nm | 40 | 122 | 210 | ||
5 | Nm | 40 | 122 | 210 | ||
7 | Nm | 34 | 95 | 170 | ||
10 | Nm | 16 | 56 | 86 | ||
L2 | 12 | Nm | 27 | 96 | 161 | |
15 | Nm | 27 | 96 | 161 | ||
16 | Nm | 40 | 122 | 210 | ||
20 | Nm | 40 | 122 | 210 | ||
25 | Nm | 40 | 122 | 210 | ||
28 | Nm | 40 | 122 | 210 | ||
30 | Nm | 27 | 96 | 161 | ||
35 | Nm | 40 | 122 | 210 | ||
40 | Nm | 40 | 122 | 210 | ||
50 | Nm | 40 | 122 | 210 | ||
70 | Nm | 34 | 95 | 170 | ||
100 | Nm | 16 | 56 | 86 | ||
Degree Of Protection | IP65 | |||||
Operation Temprature | ºC | - 10ºC to -90ºC | ||||
Weight | L1 | kg | 1.7 | 4.4 | 12 | |
L2 | kg | 1.9 | 5 | 14 |
1. Lead time: 7-10 working days as usual, 20 working days in busy season, it will be based on the detailed order quantity;
2. Delivery: DHL/ UPS/ FEDEX/ EMS/ TNT
1. who are we?
Hefa Group is based in Guangdong, China, start from 1998,has a three subsidiaries in total.The Main Products is planetary gearbox,timing belt pulley, helical gear,spur gear,gear rack,gear ring,chain wheel,hollow rotating platform,module,etc
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. how to choose the suitable planetary gearbox?
First of all,we need you to be able to provide relevant parameters.If you have a motor drawing,it will let us recommend a suitable gearbox for you faster.If not,we hope you can provide the following motor parameters:output speed,output torque,voltage,current,ip,noise,operating conditions,motor size and power,etc
4. why should you buy from us not from other suppliers?
We are 22 years experiences manufacturer on making the gears, specializing in manufacturing all kinds of spur/bevel/helical gear, grinding gear, gear shaft, timing pulley, rack, planetary gear reducer, timing belt and such transmission gear parts
5. what services can we provide?
Accepted Delivery Terms: Fedex,DHL,UPS;
Accepted Payment Currency:USD,EUR,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union;
Language Spoken:English,Chinese,Japanese